- First, the enclosed mounting plate can be glued firmly into the wing arch, preferably with good epoxy and pegs.
- Connecting cables are not necessary.
- For the systems L and XL, the light panels must be aligned once on the model during initial installation and fixed with a little epoxy.
- Then reflector surfaces are bent once so that the largest possible part of the light emission is directed to the model. ATTENTION: the reflector surfaces harden and can only be bent a few times. Fix the glued surface before you align the surfaces by hand or a small pliers to prevent breakage of the splice.
- After the flight, the Night Blades can be easily unscrewed and easily transported. There is no trace left of the night flight system.
Construction: GRP / mixed aluminum construction, 5 mm CFRP pipe, pre-assembled
Electric: 8V, 2A
Operating time: 8-8 minutes
Safety: integrated safety position light, can also be switched off by means of a soldering jumper during runtime extension
Light intensity: ~1200 lumens WHITE
Overall dimension: 310x85mm
Weight: 2x71g
Contents:
2x XLARGE wing blades
2x LIPO-330 batteries
2x Mounting plate
2x Safety light cover
4x Mounting ring
