UniLight 4W PURE Light White PUREX-040-WE
Thin navigation light with 4w reference power.
All-round light for installation behind existing glass caps, perfect for hobbyists or for DIY solutions. The heatsink is slightly concaved on one side to facilitate a more concealed installation.
The module is delivered fully pre-wired on an aluminium heatsink.
Technical Data:
Performance: 4W reference power
Voltage: 0.35A, 8(12)V
Beam angle: 160°
Light intensity: ~40 Lumen RED
Light intensity: ~70 Lumen GREEN
Light intensity: ~100 Lumen WHITE
Dimensions heatsink: D7x15mm
Dimensions chip: D8mm
Weight: 2g (without cable)
|
Design: Round
|
|
Cable Length: 1m Silicone 0.25mm2
|
|
Operating Voltage: 2S/8V or 3S/12V with additional resistor
|
|
Function: Strobe
|
|
Dimensions: 8mm
|
Purpose of Use:
Ideal as navigation light for all aircraft models ranging from 1.5 till 2.5 meters.
Delivery Content:
Equipped with 1m cable silicone and pre-configured resistor for 2S.
Warning Notice:
Please note that high-performance LEDs can become very hot, with temperatures reaching up to 70°C being completely normal. These lights are designed strobe lights only, as continuous use could lead to rapid overheating. A duty cycle of up to approximately 20% is recommended.
We cannot assume for liability overheating.
The stated reference power values are merely comparative metrics between the offered light sources. They are typically referring to a voltage operating of 12V/3S LiPo and depend on lights, operation mode and technology used.
Warning: The LED lights are extremely bright! Never look directly into an LED!
