Super Glue 30 Minute Super Strength Delayed Setting Epoxy (1oz, 28.3g) SUPSY-SS
Delayed Setting Epoxy is perfect for bonding glass, metal, china, wood, fibreglass, ceramics, etc. No mess and no spilling. Best used when extra positioning time is needed.
- Initial colour: Clear hazy to light yellow
- Final colour: Light yellow
- Maximum Gap: .25”
- Hardness, Shore D: 75-83 (After full cure)
- Set Time: 30 minutes @ 65-80°F
- Shear Strength, Steel: 2000 psi (± 20%); aluminium: 1400 psi (± 20%)
- Handling Time: After 7 hours
- Full Strength: 24 hours
- Operating Temperature Range:-65 – 225°F (-54 – 107°C)
Delayed Setting Time Epoxy Adhesive is the perfect product to use when you need more time to work to get your project pieces in place. This product allows you 30 minutes to arrange and rearrange pieces. 2000 psi strength is great for metal, glass, ceramic and plastic. Cures to a light yellow colour.
Directions:
- Surfaces should be clean and dry, free from oil and grease.
- Roughen surfaces with emery cloth or sandpaper for best results.
- Dispense from container following package directions & mix thoroughly, for about 1 minute.
- Apply to both surfaces and mate parts together.
- Remove excess epoxy immediately with denatured alcohol.
- Sets in 30 minutes at room temperature (77F or 25C) with full cure in 24 hours.
