Description
SM MODELL BAU GPS Logger 3 Telemetry GPS with TEK Vario SM2750
A fully-fledged 10 Hz telemetry GPS with micro SD memory card, TEK Vario, and accelerometer!
The new version 3 replaces the GPS logger 2 and remains fully compatible.
The new hardware offers:
a new GPS module for better GPS reception even under difficult conditions
further improved pressure sensors for even finer vario resolution with less noise
a horizontally aligned TEK connector for easier installation, especially in narrow hulls
The GPS-Logger 3 is a full-fledged GPS system that was specially developed for the needs of model making.
It is extremely small and light, but has excellent features and capabilities.
With a recording rate of up to 10 Hz and the micro-SD memory card, recordings of almost any length with high detail resolution are possible.
Telemetry via 2.4 GHz systems with return channel is an integral part of the GPS-Logger 3 and is fully integrated.
In accordance with our philosophy of supporting as many systems as possible, the GPS-Logger 3 also speaks of telemetry :
Jeti Duplex
Multiplex M Link
Graupner HoTT
Futaba
JR DMSS
FrSky
Spectrum (via Spectrum Adapter)
PowerBox Core
The telemetry used only has to be specified once in the settings in the GPS-Logger 3. This is done either via our PC program " GPS converter " or with the UniDisplay. When delivered, HoTT is selected.
The GPS-Logger 3 implements a high-quality vario with a built-in high-resolution pressure sensor via telemetry and also enables the use of compensation nozzles with the integrated TEK connection. This gives you a vario function that shows real climb and sink very precisely, regardless of the "stick thermal".
A second pressure sensor is installed for precise altitude measurement, even when operating with a TEK nozzle , which supplies correct altitude data regardless of the speed.
The built-in 3-axis acceleration sensor provides information about the loads in flight. The acceleration of all three axes can be displayed here at each waypoint in the recording and also via telemetry .
The new competition format OLC, the online contest, is also optimally supported by the GPS-Logger 3. The built-in noise sensor (ENL = engine noise level) provides data that automatically makes the engine runtimes recognizable during climb. The IGC file required for the OLC is created directly on the memory card and digitally signed, no conversion software is required.
The GPS logger 3 can also be used for another competition format, namely the Soaringleague.
Soraingleague.net is a new website for easy online evaluation of soaring flights with any model. Simple as it gets!
When operating with Multiplex M-Link, all data on the sensor bus are automatically logged by the GPS logger 3 and also written to the memory card > MSB data logger.
In addition to its own measured values, the GPS logger 3 can also read out the complete data of our UniLog 1 + 2 and UniSens-E live via a direct connection cable and write it to the memory card.
All measured values of the GPS-Logger 3 can be viewed live via our UniDisplay. All settings and alarms can of course also be conveniently programmed via the display.
The data is presented and evaluated in 3D in Google Earth TM . To convert to the Google Earth TM format, you only need our free software "SM GPS Converter " and the standard version of Google Earth TM , which is also free.
Our GPS-Logger 3 is also supported by the well-known software LogView . Here the GPS data can also be converted into the Google EarthTM format. In addition, the values can also be displayed in a normal curve form / table form and much more.
The GNU DataExplorer for evaluating the data is Java-based and therefore also suitable for Mac or Linux in addition to Windows .
Whether glider, aerobatic machine, helicopter, HLG or slow flyer, the GPS-Logger 3 can be used in almost any area due to its low weight and compact size. Of course, the GPS-Logger 3 is not only suitable for model flights. It can also be installed in RC boats, RC cars, etc.
And this is what the GPS-Logger 3 can do:
10 Hz GPS, i.e. 10 measured values per second,
particularly good data resolution
micro SD memory card
almost unlimited recording and easy reading of the data
Data is stored as plain text on the memory card.
Further processing is possible with many programs
high-resolution vario with TEK connection
Altitude measurement with second pressure sensor with automatic zero setting after switching on
integrated 3-axis acceleration sensor up to +- 16 g
direct creation of the IGC file for the Online Contest (OLC) with integrated engine noise sensor for the ENL measurement
Full telemetry support for Jeti Duplex , Multiplex M-Link , Graupner HoTT, Futaba , JR DMSS , FrSky and Spektrum (via Spektrum adapter)
Direct connection of the UniLog 1 + 2 and UniSens-E possible for data recording (not during Futaba , JR DMSS and FrSky operation)
Recording of all data on the multiplex sensor bus when operating with M-Link
Connection for receiver signal for remote control of certain functions
Recording of the receiver battery voltage
Powered by receiver battery
Internal backup battery (accumulator) for a quick start of the GPS
Start of recording adjustable by different conditions
current status is signaled via three LEDs
direct viewing of the measured values live with our UniDisplay (not during Futaba , JR DMSS and FrSky operation)
Parameter settings possible via PC, UniDisplay and telemetry
Quick conversion of data into 3D representation with Google Earth TM using our free "SM GPS Converter " software.
The program is available free of charge on our homepage www.sm-modellbau.de under the menu item Software & Updates .
Support by the LogView software
LogView is a very extensive and yet easy-to-use evaluation program for the PC that supports a large number of different measuring and charging devices from the model building sector.
Support from the GNU DataExplorer software
The GNU DataExplorer is just as comprehensive as LogView and, in addition to Windows, is also suitable for Mac and Linux.
Free firmware updates possible via memory card (the firmware file is available on the Internet at www.sm-modellbau.de under the menu item Software & Updates)
Due to its compact size and low weight, it can be used almost anywhere
Technical data and the complete range of functions can be found in the operating instructions .