Pichler Sinbad Glider (Laser Cut Balsa Kit) / 2500mm 15032
The Sinbad is a glider model for relaxed flying. The low take-off weight and the associated, low wing loading make the Sinbad the ideal light-wind glider. the quiet, majestic flight image inspires both inexperienced pilots and professionals. The Sinbad can optionally with be equipped with a brushless electric drive. The installation of a motor is prepared at the factory. The Sinbad is controlled via rudder, elevator and ailerons
Click here to view the pdf manual
Specifications
Span - 2500mm
Length - 1525mm
Take-off weight - 2300g (incl. drive and battery)
Area - 137.66 dm²
Wing loading - 13.8 g/dm²
Recommended Equipment
MASTER Servo DS3010, #C9267 (x2)
MASTER Servo DS3012MG, # C5638 (x2)
Brushless motor BOOST 40LS, # 15034
Brushless ESC/Controller = PICHLER XQ-50, # C3055
Folding prop = 12×7”, # C4202
LiPo battery = LEMONRC 3300-11.1V, # C4973
Servo cable extension 600 mm, # C9616 (x2)
Servo cable extension 250 mm, # C9614 (x2)
Battery Velcro straps 210 mm, # C4738
Recommended Tools
Mini balsa plane, #C8891
Sanding Block, #X5568
Sandpaper file, #X5565
Bindan propeller glue, # X3577
Adhesive for canopy L530, # X3583
fix it! Adhesive Assortment, # C4924
fix it! Metal clips 50mm, # C4919
fix it! Mini Clamps, #C4923
Model Making Pins, #C2434
Foil Iron, #C9758
Oracover covering film transparent of your choice
Adhesive recommendation. We generally recommend using BINDAN propeller glue. With this you achieve permanent, secure bonds. For gap-free connections, Fix It! used superglue will. For particularly stressed areas we recommend Fix It! 5 mins epoxy.
