ORACOVER Special thinner for Iron-on adhesive (250 ml) For 0960 & 0980 Adhesives 250ml 5524786
If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the appropriate thinner.
You can also remove remains from the covering film with the ORACOVER® SPECIAL THINNER.
The thinner may only be used on the iron when it is COLD and CURRENTLESS! Do not use the iron before all remains of SPECIAL THINNER have been removed.
When using the SPECIAL THINNER you should provide a good room ventilation as the SPECIAL THINNER can form explosive gases.
Information on product safety:
Hazard statements:
H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P370+P378 In case of fire: Use Sand, carbon dioxide (CO2), extinguishing powder to extinguish.
P403+P235 Store in a well ventilated place. Keep cool.
P501 Disposal in accordance with official regulations.
Special labelling of certain mixtures:
EUH066 Repeated exposure may cause skin dryness or cracking
Manufacturer: LANITZ-PRENA Folien Factory GmbH, Am Ritterschlösschen 20, 04179 Leipzig, Germany, info@oracover.de
