Oracover EPP Hotmelt Adhesive (0982) 100ml 5524784
Adhesive for EPP (Expanded Polypropylene)
For best adhesion on rough-textured and uneven surfaces, brush ORACOVER EPP adhesive thinly onto the surface. Air over night, next day you can cover the surface with ORACOVER or ORASTICK. As the surface retains a certain tack it is important that the covering is applied plane and waveless. The thermo-active adhesive provides a durable bond of covering film and EPP surface. For ironing on and shrinking the temperature affecting the surface must not exceed 160°C, as otherwise the material of the surface will be permanently damaged by the heat. Advice: For repairing you can remove the covering from the surface by re-heating the film to approx. 80°C, without damaging the surface. Contains solvents, not suitable for styro foam (Styropor) !
Information on product safety:
Hazard statements:
H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P403+P235 Store in a well ventilated place. Keep cool.
P405 Store locked up.
P501 Disposal in accordance with official regulations.
Special labelling of certain mixtures:
EUH066 Repeated exposure may cause skin dryness or cracking
Manufacturer: LANITZ-PRENA Folien Factory GmbH, Am Ritterschlösschen 20, 04179 Leipzig, Germany, info@oracover.de
