Oracover Air Hotmelt Adhesive (0961)100ml Tin 5524783
ORACOVER® AIR Adhesive has been specially developed for best bonding of lengths of film, for making blimps and airships.
It has to be applied THINLY onto both sides of the seam area, to be ironed at c. 70°C - 80°C, after drying.
We produce a suitable adhesive for every field of application, for instance to prepare wooden surfaces for easy ironing: The liquid adhesives soak into the wood, gluing unstable fibres closely and permanently to the surface. This prevents the fibres tearing off under stress and the covering coming off, which is the usual cause of wrinkles. Torn-off fibres will enter the adhesive layer of covering films, thus preventing proper adhesion. Also additional ironing does not really solve the problem: the covering film shrinks all right, but the glue layer which has become mixed with torn-off fibres can no longer properly adhere to the surface.
Our liquid adhesives are an exact match to the adhesives used for our covering films. Accordingly, always choose the adhesive appropriate for the covering film you are using. The consumption of adhesive is c. 20g/sqm, relating to dry matter. It is important to let the adhesive dry completely before covering, to prevent incompletely evaporated solvents to evaporate during ironing, thereby causing bubbles. In case our adhesives have dried out a bit in an opened tin, you can restore the original viscosity by adding the appropriate thinner.
Information on product safety:
Hazard statements:
H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P403+P235 Store in a well ventilated place. Keep cool.
P501 Disposal in accordance with official regulations.
Special labelling of certain mixtures:
EUH066 Repeated exposure may cause skin dryness or cracking
EUH204 Contains isocyanates. May produce an allergic reaction.
Manufacturer: LANITZ-PRENA Folien Factory GmbH, Am Ritterschlösschen 20, 04179 Leipzig, Germany, info@oracover.de
