Jeti Max BEC 2D Plus EX JEX-MB2-DP
MAX BEC 2D Plus EX is designed to power the receiver and servos in the model. MAX BEC 2D is a linear voltage stabiliser with an adjustable output voltage. The output voltage is set using a jumper and in one of four positions: 5.0V, 5.4V, 5.7V or 6.0V. MAX BEC 2D can be powered using NiXX and Li–XX cells. MAX BEC 2D also gives an indication of used capacity of the battery with four LED´s.
An integral part of the MAX BEC 2D is an electronic switch that uses a highly efficient type of MOSFET transistor. The main benefits of the MAX BEC 2D include a high voltage rating (to 12 cells NiXX) and low current in the off state (170 μA). The analog voltage stabilisation does not contribute to radio interference.
The Max BEC 2D Plus EX includes a magnetic switch, so there is no mechanical wear-and-tear from switching the unit on and off.
The MAX BEC 2D plus EX supports on / off via RC Switch. It can be easily installed.
The unit comes equipped with a large heat-sink to dissipate any excess heat. In addition to its magnetic switch feature, the 2D Plus EX is programmable by using the JETIBOX and is also Duplex 2.4EX compatible.
This allows audible alarms to be configured for low input voltage or high-temperature. When used with the Duplex 2.4EX, it also allows real-time feedback of input voltage and temperature as well as output voltage wirelessly from the JETIBOX profi.
Redundant inputs are provided for power-supply and the output features an MPX type socket, directly supporting Duplex and all Duplex EPC receivers.
Please Note: There are no connectors fitted to the Battery Input Leads. These will need to be soldered on to match your batteries.
