Description
HSD Jets HSD Jets F-16 6kg Turbine Foam Jet, Belgian (PNP, no turbine)
Q: What does PNP mean?
A: It means the aircraft has equipment already installed and tested, for example: servos, ESC, power system, landing gear, control system (UBEC is included but no power supply), light cables (according to the model of aircraft), but clients will have to supply or buy a remote control, receiver, battery, and charger themselves. The aircraft is 90% installed. *Note: If bought with a turbine, the turbine will not be pre-installed.
*: A: The reason grass runways are not recommended, is due to the size of the undercarriage and wheels, not all grass runways/flying fields are the same, many are rough with divots and if the grass is not smooth, flat or is not short this could rip the undercarriage out and we can’t warranty this. While Tarmac and Concrete tend to be a lot smoother, flatter and more uniformed.
Specifications
| Wingspan | 1344mm (52.9in) |
| Length | 1809mm (71.2in) |
| Flying Weight | 8.5kg (18.7 lb)(with 1800cc Aviation kerosene) |
| Turbine Engine | 6～8KG Turbine (required & not included) |
| Cruising speed | 150～200 km/h |
| Flying time | 3～5 mins |
| Wing area | 47.6 dm2 |
| Wing load | 178.6 g/dm2 |
| Main material | 20 times the import of aeromodelling EPO |
| Painting surface | Matte environmental water-borne paint + decal |
| Suitable experience level | □Zero basis □Beginner ■Intermediate □Advanced |
| PNP Assembly difficulty | □☆10mins ■★☆30mins □★★60mins |
| Suitable for ambient temperature | 0℃～40℃ |
| Radio System | 6 channel (required & not included) |
| Control System | MFC-2085 |
| Servos(All 7.4V High voltage) |
40g×2 Metal gear with 60mm lead (left & right Horizontal tail forward) 25g×2 Metal gear with 150mm lead (left & right Aileron forward) 25g×1 Metal gear with 230mm lead (Rudder forward) 12g×2 Metal gear with 480mm lead (with protection function)(Left & right rear cover plate forward) 12g×1 Metal gear with 480mm lead (with protection function)(Front cover plate forward) 12g×1 Metal gear with 320mm lead (with protection function)(Front wheel steering forward) 12g×1 Metal gear with 480mm lead (Front wheel 360 locking forward) 12g×1 Metal gear with 480mm lead (Rear wheel 360 locking reverse) 12g×1 Metal gear with 480mm lead (Rear wheel 360 locking forward) |
| Recommended Battery | 2S,7.4V,3300～5200mAh×2,LiPo with XT60 type plug(required & not included) |
| Ailerons | Yes |
| Flaps | No |
| Elevator(Horizontal tail) | Yes |
| Rudder(Vertical tail) | Yes |
| The smoke system | No |
| LED lights system | Yes |
| Electromagnetic brake system | Yes |
| Reinforced gyro | Selective configuration (not included) |
| Packaging / Size | Packing Box + Outer Box(Card mark)/1456×518×337(mm) |
| CG (Centre of Gravity) | 155～160mm from the leading edge of the Main Wing |
| Landing Gears | All-metal simulation electronic retractable landing gear×3 |
| Battery Charger | LiPo battery charger (required & not included) |
PACKAGE INCLUDES:
- Fuselage×1
- Left Wing×1
- Right Wing×1
- Nose×1
- Cockpit canopy×1
- Vertical Stabilizer×1
- Left Horizontal tail ×1
- Right Horizontal tail ×1
- L/R Auxiliary tank ×1
- L/R wingtip missile ×1
- L/R wingtip missile pylon ×1
- L/R No.1 missile ×1
- L/R No.2 missile ×1
- L/R tail fins ×1
- Main wing carbon tube L=400mm external diameter 10mm×2
-
Accessories Bag ×1HF-16 V2 Manual×1
- Fuselage antenna ×1
- Pitot×1
- Screw (HA3×14mm)×10 (Nose & Engine)
- Screw (HM3×6mm)×2 (Horizontal tail)
- Screw (HA3×10mm)×8 (Tail nozzle & Vertical)
- Screw (KA3×16mm)×8 (Missile)
- Screw (KA3×20mm)×8 (Missile)
- Screw (KM3×60mm)×8 (Auxiliary tank)
- Screw (HM3×10mm)×8 (Main wing)
- MFC-2085 Manual×1
REQUIRES:
- Turbine 6～8KG Thrust (required & not included)
- 6 channel radio system(radio & receiver) (required & not included)
- 2S, 7.4V, 3300～5200mAh×2 LiPo with XT60 plug (required & not included)
- LiPo battery charger (required & not included)
