Emcotec SPS Remote Switch Actuator A72035
Remote controlled switch actuator for switching on and off the "SPS" Safety Power Switch module. The parallel operation of the PLC magnetic switch actuator is also possible - this results in redundant security.
The switching thresholds (range -200% to +200%) can be programmed easily. Programmable failsafe feature which switches off the SPS on missing or incorrect receiver signals.
Hint
The SPS RCS can only be used, when the receiver is supplied by its own power supply. The usage of the SPS RCS with an internal BEC of an speed controller is not possible.
Hint
The recent SPS-RCS versions cannot be used with high speed channels (<10ms). The module is not suitable for transmitters that only offer high speed channels (e. g. Robbe/Futaba T-18 in 12 channel mode). When using the SPS-RCS with these transmitters the SID Servo-Impulse-Delay module (item no. A18090) can be plugged between receiver and SPS-RCS. The next SPS-RCS batch will be modified so new modules can be used with high speed channels.
Delivery includes patch cable to the receiver (approx. 29.5cm / 11.61in), patch cable to the SPS (approx. 10.5cm / 4.13in) and operating manuals (German, English).
