Emcotec DPSI V-Match Servo Matching System / HV Servo Reverser A71005
The Emcotec DPSI V-Match is a V-cable with integrated servo matching system for connection of two commercially available servos at a single receiver output (or DPSI output).
One servo signal is fed through unchanged, the second one can be (re)-adjusted for direction, center position and end positions.
No external programming device is necessary whatsoever (e.g. a PC or equivalent system).
A simple magnet (included in delivery) suffices.
Adjustment accomplished directly using the corresponding transmitter channel and remote control.
Servo V-cable with adjustable matching for one of the servos' direction, center position and end positions
Ideal for huge aerobatic models, where several servos actuate on one rudder, or e.g. for gliders, were both spoilers are controlled by two separate servos but only one receiver channel is left over
DPSI V-Match is also optimally suitable for DPSI RV systems
Pulse amplifier for weak servo pulses (e.g. Futaba FASST receiver 6014)
Effective interference suppression with special LCL filters
0.34 mm2thick connection cable and high grade connectors
4-layer PCB layout for highest packing density and maximum current load
Operating voltage range from 4V up to 8.4V
Resolution 3200 steps
Programming simply accomplished using the delivered magnet and the remote control
Delivery includes magnetically switch actuator and operating instructions
A71005
| Weight: |
|
5g
|
| Dimensions: |
|
50mm x 8,4mm x 7,2mm (L x B x H) |
