Arrows Hobby Viper 50mm PNP with Vector Stabilisation System (773mm) ARR012PV
Sleek, powerful and perfectly formed the Arrows Hobby Viper will be something of an eye-opener to anyone who still thinks EDF jets have some catching up to do. Experience the Viper in action and you’ll quickly realise that nothing could be further from the truth. Packing a jet-like 50mm 11-blade fan that’s spun up by a precision 2627 4500KV brushless motor, this 3S-fuelled pocket rocket will find favour in the hands of all who seek smooth, flowing aerobatics, a cloud punching performance and exceptional speed. But that’s not the half of it, the Viper is also a supremely practical jet that copes beautifully in a wind (thanks to its switchable 3-mode Vector stabilisation system) exhibits exceptional low speed handling, is small enough to transport in one piece, retract (hassle) free and enticingly budget-friendly. All this grace and performance from a 3S LiPo will almost certainly have you reassessing your EDF spend. So good is the Arrows Viper, we’re convinced it’ll become a frequent flyer in your air fleet and, as we all know, that equates to superb value for money. As Arrows Hobby so rightly says in its promotional blurb, “Small [and simple] is beautiful.”
Features
- High quality pre-decorated EPO foam airframe.
- Glue- and screw-together assembly.
- High-quality pre-installed hardware.
- Pre-fitted switchable Vector stabilisation system.
- Superior ball joint control linkages.
- Outstanding power-to-weight ratio.
- Secure magnet-retained canopy.
- Retract-free, fly anywhere simplicity.
- Suits 3S 11.1V 1300 – 2200mAh 30C LiPo.
- Three pre-installed high-quality digital servos.
- Takes standard 4-channel radio (aileron, elevator, throttle).
- 11-blade fan.
- 30-minute assembly time.
- 8+ minutes on 2200mAh LiPo.
What's In The Box
1x Factory assembled fuselage with decals applied.
1x Factory assembled 1-piece wing with decals applied.
2x Winglet mouldings.
1x Factory assembled 1-piece tailplane with decals applied.
1x Pre-installed 2627 4500KV brushless motor.
1x Pre-installed 50mm 11-blade fan.
1x Pre-installed 30A ESC with XT60 connector.
1x Pre-installed Vector switchable 3-mode gyro.
3x Pre-installed high quality 9g digital servos.
1x Screw set.
1x Comprehensive instruction manual.
Needed To Complete
1x 4-channel transmitter and receiver combo.
1x 3S 1300 – 2200mAh 30C LiPo with XT60 connector.
1x 3S compatible LiPo balance charger.
Specifications
| Wingspan (mm): |
773 |
| Length (mm): |
696 |
| Motor (KV): |
4500 |
| Rec'd battery: |
3S 2200mAh |
| ESC (A): |
30 |
| All-up weight (g): |
470 |
