UniLight 19mm Chip Only Strobe Light, 18Wx2 - White STRB22-180x2-WE
Chip-only strobe light chip!
The solution for self-builders: pure power chip in white or red. Please make sure to operate the chip only in flash mode and with sufficient cooling.
Electrical: 18W reference power with x2 technology, 8V / 12V, 1.5A
Beam angle: 120 °
Light intensity: ~ 500 lumens RED
Light intensity: ~ 1200 lumens WHITE
Dimension: D22x2mm
Weight: 2g (without cable)
With 1m silicone connection cable, ready for connection to 8V / 2S Lipo. Additional resistance for operation with 12V / 3S Lipo
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
