UniLight 10 / 24mm ROUND navigation light, 8W Green RND-080-GN
8W spot light with two clear polycarbonate caps (10mm and 24mm). The module we finished wired with an aluminum bracket for cooling and delivered Monday. Likewise, another small heat sink for an alternative assembly with the smallest dimensions is included. For longer operation, please pay attention to the temperatures, in the case of the 8W module we recommend the use of cooling plate AND heat sink.
Only the desired cap and the heat sink must be glued on with superglue. The 10mm cap serves as a light distribution for concealed installation behind a GFK wall, the 24mm cap can be used for outdoor installation as it completely covers the module. As an accessory, a profile extension made of polycarbonate is included, which can optionally be glued to the 10mm cap.
Electricity: 8W reference power, 8(12)V, 0.7A
Beam angle: >160°
Light intensity: ~90 Lumen RED
Light intensity: ~150 Lumen GREEN
Light intensity: ~200 Lumen WHITE
Dimension base plate: 20x50mm
Dimension additional heatsink: 15x15x6mm, self-adhesive
Small cap: D10x12mm + profile expansion
Big cap: D24x10mm
Weight: 8g (without cable)
Ready to use with 1m connection cable and series resistor for 2S, resistor for 3S enclosed
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
