Touch Screen Gyroscopic Retract Controller and Door Sequencer with Brake Assist for Electric Landing Gear LGC15 from Xicoy
The Xicoy LGC15 is programmable through an integrated color touchscreen.
Direct control of 3 motors in bidirectional mode up to 12 V/5 A. Supports the different motor shut-off control types currently available (time, overcurrent and encoder).
Dual control of electric brakes, full proportional, lineal and adjustable pulsed mode.
Differential brake mode, to steer the model using the brakes.
Steering servo processor. Gain, sense and center can be adjusted. The steering servo is centered during retraction.
Internal Gyro. It can be mixed with the steering servo output and mixed to the differential brakes.
8 servo outputs for the control of the doors. The endpoints of each servo can be programmed individually. The Servo speed can be programmed independent in the two senses in 0,1 s resolution.
10 step sequencer. The position of the gears and the position of the 8 doors can be defined independent in each step. Step duration resolution in 0,1 s steps.
Wide choice of RC inputs. Single RC channel, Dual RC channel, Futaba SBUS, UDI Bus, SRXL Bus, JR Mode A Bus, JETI EX Bus.
Programmable trough integrated color touchscreen.
uSD card slot to save the settings and upgrade the software.
IMPORTANT:
The motors on the retracts can be damaged if overloaded due at improper programming. For this reason, Xicoy WILL NOT provide any settings for any brand, all information provided is the one contained in the user's manual. Always contact the manufacturer of the retracts to get the proper settings for your gear.
Box measures: 65X45X20mm
Weight: 67gr
Please follow this link for the Manual and user Video. http://www.xicoy.com/LG15.pdf
