JetTronics Proportional Zero Loss Brake Valve B-Ventil from Jet-Tronics
The revolutionary zero loss brake valve from Jet-Tronics that allows you to apply your pneumatic brakes in a near fully proportional manner without the pressure loss often experienced with other makes.
The Jet-Tronics Brake valve does not consume air while braking proportionally. A big advantage of this valve is the possibility to partly activate the brakes already in the air if the undercarriage is dropped. While touchdown the plane immediately decelerates due to the partly activated brakes which causes much shorter landing distances and it also prevents jumping of the plane. In case the runway is still too short, it is possible to program down elevator for full brake. A further advantage is that you can use the brakes during taxiing to the start point without being anxious to waste air.
These valves are equipped with new digital microcontrollers, making their handling even more convenient:
Ease programmable brake thresholds for compatibility with all R/C receivers
Very sensitive braking in a large speed range
The valve is simply connected to a receiver- or controller-output just like you would connect a servo.
This allows precise and easy programming of the switching points with the help of a small push-button on the valve.
Two LED's informs you about the current switching state.
Instructions in English: http://www.jet-tronics.de/Jet-Tronics%20Manual%20Bremsventil%20Brakevalve%20M-Ventil%20M-Valve%20de-en.pdf
|
Technical data
|
|
Supply voltage
|
3,5 V - 7,5 V
|
|
Current consumption
|
200 mA
|
|
Pressure range
|
0 - 10 bar
|
|
Dimensions (L/W/H)
|
27 x 29 x 30 mm (without connectors)
|
|
Weight
|
32 g
|
|
Connectors
|
Universal connection 2.5 - 4 mm tubes (outer diameter)
|
