iCharger 4010 DUO 2000W Balance Charger from Junsi Factory Upgraded 6 Months Warranty
This charger was sent back to the factory as it had an issue when tested before shipment.
The factory tested and sorted the issue FOC but as it is not new its being sold as ex display / repaired.
This charger is fully tested by us and comes boxed with all items as when new. Please ask for more details
Please Note. This screen is fitted with the factory screen protector as you can see in the picture and is perfect underneath.
The extremely powerful iCharger 4010 DUO is by far the most powerful charger available, today! Delivering a massive 2000W (@23.5V) in synchronous mode! It’s effectively two 10S chargers in one . When used in dual mode, capable of supplying a massive 70A continuously!
2 x Balance Board CB1010-XH (JST) and connecting harnesses are included with this charger.
| Input Voltage Range |
9 – 50V |
| Input Current Limit |
65A |
| Maximum Charge Power Capacitiy |
1400W per channel @ 23.5V (2000W in dual mode) |
| Charge Current Range |
0.05-40A per channel or 70A in dual mode |
| Discharge Power Capacity |
130W per channel or 200W in dual mode |
| Max Regenerative Discharge Power Capacity |
1400W per channel or 2000W in dual mode |
| Max External Discharge Power Capacity |
1600W @ 40V/40A or 3200W in dual mode |
| Current Drain for Balancing |
1.2A per channel or 2.4A in dual mode |
| Balance Accuracy |
<10mV |
| Lithium (LiPo/LiIo/LiFe) Battery Cell Count |
1-10 Series |
| NiCad/NiMh Battery Cell Count |
1 – 25 Series |
| Pb Battery Cell Count |
1 – 18 Series (2-36V) |
| Log Files Storage |
16MBit (31 Hours) |
| Battery Setup Memories |
10 |
| Intelligent Temperature Control |
Yes |
| PC Connect |
USB Port |
| Weight |
1470g |
| Dimensions (L x W x D) |
210 x 140 x 80mm (5.63” x 4.84” x 1.81”) |
All Junsi chargers of the X and DUO series are developed and approved for use in model making.
Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making!
No AGM batteries may be charged in the PB range.
Please Note: We are getting many none modelling customers buying this charger for many uses not modelling related.
We can offer no support for any use not model related and incorrect use may effect warranty. A 12 months factory repair warranty is offered with this charger as the factory insist on seeing all chargers that have an issue
Software Updates
New Download Manager Link
http://www.hillrc.com/Endownload.asp
Version V2.19 Now available
iCharger 4010DUO's upgrading software:
Please note - Software updates must be performed using the optional iCharger USB cable designed exclusively for iChargers. Using other USB cables may result in damage to the iCharger.
CLICK FOR PDF MANUAL
