Castle Creations Castle Link PSoC USB Programming Kit CC011-0173-00
Overview
Castle Link V4 is our new 32-bit based USB adapter.
Note: Compatible with Cobra 8 ESC only and uses the new Castle Link 2 Windows software.
In The Box
- Castle Link V4 adapter
- Type C USB cable
- Castle Decal sheet
Program your Cobra 8 ESC on your Windows PC (10 or higher) with the Castle Link V4 USB programming kit.
- Set up of programmable options with point and click ease
- View your current program settings
- Download and view the ESC's onboard data logs
- Update ESCs with new firmware (if available)
Set-up instructions:
- Download the Castle Link 2 software from the Castle Creations Downloads area.
- Run the Castle Link 2 installer and follow on-screen prompts.
- Plug the Castle Link V4 adapter into the provided Type-C USB cable.
- Connect the ESC's receiver lead to the Castle Link adapters prongs; the brown wire connects to the pin marked "GND" or "-".
-
Note: Castle Link Classic program is not compatible with the Castle Link V4 adapter and Cobra 8 ESC
