3s XH Balancer Adapter Cable for Vspeak Variometer Pro
The 3s XH battery balancer connection is pre made by Vspeak
The length of the adapter cables is approximately 20cm.
In battery's with a number of cells up to 4S the voltages of all single cells (and the total battery voltage) can be monitored. 1 .. 3 and the total battery voltage. The battery technology is so advanced, that under normal use the battery's discharge of all cells is uniform, so only small voltage differences between the cells occur.
For correct measurement of cells and the total voltage a ground connection between the negative terminal of the battery and the negative terminal of the receiver is necessary. For controllers with BEC, this connection is automatically done – BUT NOT in opto-controllers, there you have to make a ground connection separately.
For EH and XH balancer are assembled cables available. For other systems the VSpeak-Balancer connector can be supplied.
Please Note: All images showing a balance connector with this lead is an example of how to wire this lead.
This lead is supplied with a 3s HX connector to connect to your battery balance connector. But most balance lead pigtails are available from Nexus Models should you want to use a different battery type or size.
