Fusion Smart Guard 3 Lithium Battery Checker & Balancer P-FS-BC07
The Smart Guard 3 is the perfect device for checking the condition of your batteries.
It can be used with the most common battery chemistry types found in RC modelling such as LiPo, LiIon, LiFe, NiCd and NiMH.
When the Smart Guard 3 is used with 2S-8S Lithium or 4-8 cell Nickel batteries no external power is required for the device to function.
If you are checking the condition of a 1S Lithium battery, a 5V external power supply will be required.
If you need to test less than 4cell Nickel based battery packs then power from a 2-8S Lithium battery must be connected to provide working power.
Features
Displays battery pack information such as Total Battery voltage, Highest cell voltage, Lowest cell voltage, Voltage difference between highest and lowest cell voltages. Remaining battery capacity as a percentage.
Lithium Battery Balance Discharge
Servo Test Mode
ESC Test Mode
|
Li-Po |
Li-Fe |
Li-Ion |
Li-HV |
NiMH |
Input Cells |
1~8 |
1~8 |
1~8 |
1~8 |
1~8 |
Total Voltage |
Yes |
Yes |
Yes |
Yes |
Yes |
Total / Cell battery capacity (0~99% ) |
Yes |
Yes |
Yes |
Yes |
*NO |
Individual Battery Cell Voltage |
Yes |
Yes |
Yes |
Yes |
No |
Lowest Cell Voltage |
Yes |
Yes |
Yes |
Yes |
No |
Highest Cell Voltage |
Yes |
Yes |
Yes |
Yes |
No |
Voltage Difference Between Highest and Lowest Cell Voltages |
Yes |
Yes |
Yes |
Yes |
No |
* The battery capacity readings for NiCd & NiMh cells are ony an estimate and should not be relied upon.
N.B. The Smart Guard connects directly to JST-XH and JST-EH type balance connectors. Please use other balance boards with for Thunderpower / Flightpower or for Polyquest type connectors.