{"title":"Telemetry-EL","description":"\u003cdiv style=\"display:none;\"\u003eTelemetryEL\u003c\/div\u003e\n\u003cdiv style=\"display:none;\"\u003eTelemetry EL\u003c\/div\u003e","products":[{"product_id":"jeti-to-powerbox-core-telemetry-bridge-z0501-from-smoke-systems","title":"Jeti to Powerbox Core Telemetry Bridge Z0501 from Smoke Systems V14","description":"\u003ch3\u003eJeti to Powerbox Core Telemetry Bridge from Smoke Systems\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe Telemetry-Bridge connects Jeti-compatible sensors to the telemetry bus (P²-Bus) of the PowerBox CORE.\u003cbr\u003eIn this context, sensors are e.g. Height measurement, engine controls (ESC), turbines ECU and much more\u003cbr\u003eThe sensors only have to support the unencrypted EX-BUS protocol or Jeti EX.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMany manufacturers offer telemetry-capable devices that support these protocols.\u003cbr\u003eAll of these devices can be connected to CORE telemetry via the Tele-Bridge.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis small, lightweight adapter is simply plugged between the Core P² bus and the sensor. Power is supplied via the receiver (if the sensor does not have its own power supply). Configuration is very simple via the sensor menu in the core transmitter. (No programming device or similar is necessary) During setup, the values are read from the sensor and saved in the Tele-Bridge. The sensor values therefore only have to be read in once.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBridging Jeti to CORE is done in three easy steps: (Klick at the Headings for a small movie)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=js6fNcYfTVw\" title=\"Video\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eClick Here to see how it works. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=vhtRkg08Mc8\" title=\"Video\" target=\"_blank\"\u003eClick Here for Video 1\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=l7aqzguePpE\" title=\"Video\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eClick here for Video 2 \u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=aAu91p9j_QY\" title=\"Video\" target=\"_blank\"\u003eClick Here for Video 3\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003e1. Detect the Tele-Bridge:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe connection to the P² bus of the CORE is made simply via the fixed connection cable of the Tele-Bridge. The Tele-Bridge is immediately ready for use and is recognized by the CORE transmitter. To start the detection, tap and hold the CORE display and then press [Rescan sensors].\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003e2. Reading in the sensor data:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe Tele-Bridge receives the data from the Jeti sensor and forwards it to the P² bus of the CORE. In order for the telemetry data to be transmitted to the CORE, the data provided by the sensor must first be read in. To do this, the Tele-Bridge scans the sensor once on request.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003e3. Display of sensor data:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe data from the Jeti sensor is now available in CORE telemetry. A maximum of 15 values can be displayed per sensor. Select the values that you want to be shown in the CORE display. You can set the threshold values and alarms as usual in the CORE.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eNot all sensors provide real EX or EX-BUS data. In these cases the Tele-Bridge supports the \"simple text\" protocol. The first two text lines sent, here are displayed directly in the status field of the CORE (both lines toggle every 2 sec.).\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e(The example shows the values of the Jeti MALTI altimeter)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e### GPS and DATE\/TIME Values are not supported ###\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eSome Sensors are already tested: Plus many more from many manufacturers should work with ease. \u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJeti-Master Spin PRO (TEXT), YGE 165HVT (EX-BUS),\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eGraupner BRUSHLESS CONTROL + T 160A HV ESC BEC (HoTT ESC)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJeti CentralBox 100\/200 (EXT), Jeti MBar (EXT), Jeti MT300 EX (EXT),\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJeti Malti (TEXT, EXT), Jeti MRPM (TEXT, EXT), Jeti MU3 (EXT),\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eSmokeDriver (EX-BUS and Jeti EXT)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eKontronik TelME Jeti (EB-BUS)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eAltis V4+ (Jeti_3RDEX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eTow winch SSW-Pro (Jeti-3rd-EX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJeti MasterMEZON 135 opto (Jeti-EX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJetCat ECU-V10 (JetCat ab Version 8)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJetCat PRO-Interface (JetCat ab Version 7)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJeti MainSwitch 100\/200 (Jeti-EX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJeti MSpeed (Jeti-EX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eAltis V4+ (Jeti_3RDEX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eTow winch SSW-Pro (Jeti-3rd-EX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJeti MasterMEZON 135 opto (Jeti-EX)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJetCat ECU-V10 (JetCat ab Version 8)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eJetcat V12 ECU\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003e\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003eARES-\u003c\/span\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003eignition \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e\"Albinger \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eignition\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e\" ((Jeti-3rd-EX)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5 ff1\"\u003eYGE 135 opto\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-Bus)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5 ff1\"\u003eScorpion Tribunus II\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-BUS)\u003cbr\u003e\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5 ff1\"\u003eIBEX ESC\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-BUS) since V11\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e(Since version 3.0, HoTT ESC (Speed controller) are also supported)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan\u003eVersion V9 Please Note: V10 \u0026amp; V11 only add update for HOTT \u0026amp; Jetcat V12 ECU\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Smoke Systems","offers":[{"title":"Default Title","offer_id":43779737288947,"sku":"Z0501-V14","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4858\/8275\/products\/telementry-bridge_1.png?v=1684628931"},{"product_id":"jeti-to-powerbox-core-telemetry-bridge-hub-z0502-from-smoke-systems","title":"Jeti to Powerbox Core Telemetry Bridge HUB Z0502 from Smoke Systems","description":"\u003ch3\u003eJeti to Powerbox Core Telemetry Bridge HUB Z0502 from Smoke Systems\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe Telemetry-Bridge HUB \/ PBS Dock 6624 Version connects Jeti-compatible sensors to the telemetry bus (P²-Bus) of the PowerBox CORE.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe TeleBridge HUB is a four-way distributor for the P²BUS, enabling the connection of multiple sensors and has an extra input for a Jeti \/ JetCAT sensor. On that it connects Jeti-compatible sensors to the telemetry bus (P²-Bus) of the PowerBox CORE.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e(Since version 6.0, JetiBOX emulator is implemented)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eIn this context, sensors are e.g. Height measurement, engine controls (ESC), turbines ECU and much more\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe sensors only have to support the unencrypted EX-BUS protocol or Jeti EX.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eMany manufacturers offer telemetry-capable devices that support these protocols.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThis small, lightweight adapter is simply plugged between the Core P² bus and the sensor. Power is supplied via the receiver (if the sensor does not have its own power supply). Configuration is very simple via the sensor menu in the core transmitter. (No programming device or similar is necessary) During setup, the values are read from the sensor and saved in the Tele-Bridge. The sensor values therefore only have to be read in once.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eBridging Jeti to CORE is done in three easy steps: (Klick at the Headings for a small movie)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Video\" href=\"https:\/\/www.youtube.com\/watch?v=js6fNcYfTVw\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eClick Here to see how it works. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"Video\" href=\"https:\/\/www.youtube.com\/watch?v=vhtRkg08Mc8\" target=\"_blank\"\u003eClick Here for Video 1\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Video\" href=\"https:\/\/www.youtube.com\/watch?v=l7aqzguePpE\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eClick here for Video 2 \u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"Video\" href=\"https:\/\/www.youtube.com\/watch?v=aAu91p9j_QY\" target=\"_blank\"\u003eClick Here for Video 3\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003e1. Detect the Tele-Bridge:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe connection to the P² bus of the CORE is made simply via the fixed connection cable of the Tele-Bridge. The Tele-Bridge is immediately ready for use and is recognized by the CORE transmitter. To start the detection, tap and hold the CORE display and then press [Rescan sensors].\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003e2. Reading in the sensor data:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe Tele-Bridge receives the data from the Jeti sensor and forwards it to the P² bus of the CORE. In order for the telemetry data to be transmitted to the CORE, the data provided by the sensor must first be read in. To do this, the Tele-Bridge scans the sensor once on request.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003e3. Display of sensor data:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe data from the Jeti sensor is now available in CORE telemetry. A maximum of 15 values can be displayed per sensor. Select the values that you want to be shown in the CORE display. You can set the threshold values and alarms as usual in the CORE.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eNot all sensors provide real EX or EX-BUS data. In these cases the Tele-Bridge supports the \"simple text\" protocol. The first two text lines sent, here are displayed directly in the status field of the CORE (both lines toggle every 2 sec.).\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e(The example shows the values of the Jeti MALTI altimeter)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e### GPS and DATE\/TIME Values are not supported ###\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eSome Sensors are already tested: Plus many more from many manufacturers should work with ease. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti-Master Spin PRO\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(TEXT),\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eYGE 165HVT\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-BUS), \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eGraupner BRUSHLESS CONTROL + \u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eT 160A HV ESC BEC \u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e(HoTT ESC\/EAM)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti CentralBox\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e100\/200 (\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti-EX\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e),\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cb class=\"fs10lh1-5\"\u003e\u003cspan class=\"fs10lh1-5\"\u003e Jeti\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cb class=\"fs10lh1-5\"\u003e\u003cspan class=\"fs10lh1-5\"\u003eMBar\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti-EX\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e),\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cb class=\"fs10lh1-5\"\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti \u003c\/span\u003e\u003c\/b\u003e\u003cb class=\"fs10lh1-5\"\u003e\u003cspan class=\"fs10lh1-5\"\u003eMT300 EX\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti-EX\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e),\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti Malti\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(TEXT, \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti-EX\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e),\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cb class=\"fs10lh1-5\"\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti MRPM\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(TEXT, \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti-EX\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e),\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cb class=\"fs10lh1-5\"\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti MU3\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e (\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti-EX\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e), \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e\u003cb\u003eJeti SBEC30\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e (Jeti-EX)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eSmokeDriver\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-BUS and Jeti-EX)   \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5\"\u003e\u003cb\u003eKontronik TelME\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e Jeti  (EB-BUS) \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs11lh1-5\"\u003eJeti MasterMEZON 135 opto\u003c\/span\u003e\u003cspan class=\"fs11lh1-5\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs11lh1-5\"\u003e(Jeti-EX)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJetCat PRO-Interface \u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e(JetCat ab Version 7)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti MainSwitch 100\/200\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e  (Jeti-EX)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti MSpeed\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e (Jeti-EX)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJetCat ECU-V12\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e(JetCat ab Version 7)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eJeti MaxBec 2D plus\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(Jeti-EX)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003eAltis V4+\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(Jeti_3RDE\u003c\/span\u003e\u003cb\u003e\u003cspan class=\"fs10lh1-5\"\u003eX)\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003eTow winch\u003c\/span\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cem\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003eSSW-Pro\u003c\/span\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/b\u003e\u003cspan class=\"fs10lh1-5\"\u003e(Jeti-3rd-EX)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5 ff1\"\u003eARES-\u003c\/span\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003eignition \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e\"Albinger \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003eignition\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e\" ((Jeti-3rd-EX)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5 ff1\"\u003eYGE 135 opto\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-Bus)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5 ff1\"\u003eScorpion Tribunus II\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-BUS)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"fs10lh1-5 ff1\"\u003eIBEX ESC\u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e \u003c\/span\u003e\u003cspan class=\"fs10lh1-5\"\u003e(EX-BUS) since V11\u003c\/span\u003e\u003cspan class=\"fs10lh1-5 ff1\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e(Since version 3.0, HoTT ESC (Speed controller) are also supported)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVersion V9 Please Note: V10 \u0026amp; V11 only add update for HOTT \u0026amp; Jetcat V12\u003c\/span\u003e\u003c\/p\u003e","brand":"Smoke Systems","offers":[{"title":"Default Title","offer_id":43779737485555,"sku":"Z0502","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4858\/8275\/products\/jeti_to_powerbox_core_telemetry_bridge_hub_v9_z0502_from_smoke_systems-1.png?v=1684628994"},{"product_id":"live-telemetry-fuel-gauge-for-combustion-turbine-engines-from-smoke-systems-fuel-sensor-m","title":"Live Telemetry Fuel Gauge for Combustion \u0026 Turbine Engines from Smoke Systems Fuel Sensor (M) upto 200N Turbines","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eLive Telemetry Fuel Gauge for Combustion \u0026amp; Turbine Engines from Smoke Systems Fuel Sensor (M) \u003cb\u003e15 - 200ml\/min \u003c\/b\u003e\u003cspan class=\"fs12lh1-5\"\u003e(in pressure lines up to 800 ml\/min)\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan class=\"fs12lh1-5\"\u003ePlease Note. \u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan class=\"fs12lh1-5\"\u003eAll other options of this unit are available from stock but please call to make this happen, as we stock a full range of fittings \u0026amp; can swap them over. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eFuel gauge for combustion and turbine\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eIs there enough fuel in the tank?\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eCan I do another tow?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eThe Fuel-Sensor provides a reliable answer to such questions.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThis telemetry sensor (for PowerBox P²BUS and Jeti EX-BUS) measures the fuel flow from the tank to the engine or to the turbine and can therefore reliably display the tank level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eFuel-Sensor (M)\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eWith its measuring range of 15 - 200ml\/min (in pressure lines up to 800 ml\/min), this sensor is well suited for large combustion engines greater than100ccm and turbines up to approx. 200N thrust. The fuel sensor is simply inserted into the fuel line and measures the flow in the fuel line. Gasoline and diesel\/kerosene as well as methanol can be used as fuel. Installation is very easy with the screws provided.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThis telemetry sensor (for PowerBox P²BUS and Jeti EX-BUS) measures the fuel flow from the tank to the engine or to the turbine and can therefore reliably display the tank level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eDue to the measuring range, the sensor is suitable for combustion engines from approx. 100ccm and turbines up to approx. 200N thrust.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eTelemetry for CORE\/ATOM and Jeti\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe fuel sensor can be connected to the Jeti EX-BUS and the PowerBox P²BUS. The protocol used is automatically recognized by the sensor. The settings in the sensor are also made via the BUS. A separate programming device is not required. With the Jeti, the setting is made via the JetiBOX in the transmitter and with the PowerBox via the sensor menu.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eOnly a few settings need to be made:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eReset channel:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe fuel gauge is reset manually after refueling via a freely selectable channel.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003etank volume:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe tank size is set here and saved in the sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eReserve:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThis is the amount of fuel left in the tank when the alarm goes off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe sensor is immediately ready for use. As soon as the fuel sensor is connected to the bus, it automatically adapts to the correct bus protocol.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eThe sensor supplies the following values:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e Tank capacity in ml\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e tank content in %\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e Reserve volume in ml\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e flow in ml\/min\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003e(The values shown are shown accordingly for Jeti.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eFitting Options available. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"fs12lh1-5\"\u003eVarious hose connections are available for installation in the fuel line:\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"fs12lh1-5\"\u003e\u003cb\u003eFESTO\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"fs12lh1-5\"\u003e connectors with 6mm or 4mm inner diameter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"fs12lh1-5\"\u003e\u003cb\u003eFESTO\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"fs12lh1-5\"\u003e hose nipples with 2,95mm, 3,6mm  or 4,8mm outer diameter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Smoke Systems","offers":[{"title":"Festo QS Push Fitting for 4mm Tube \/ Festo Barb for 4mm Tube","offer_id":43780163207411,"sku":"Fuel-Sensor (M)","price":136.74,"currency_code":"GBP","in_stock":true},{"title":"Festo QS Push Fitting for 4mm Tube \/ Festo Barb for 6mm Tube","offer_id":43780163272947,"sku":"Fuel-Sensor (M)","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"Festo QS Push Fitting for 4mm Tube \/ Festo QS Push Fitting for 6mm Tube","offer_id":43780163305715,"sku":"Fuel-Sensor (M)","price":138.49,"currency_code":"GBP","in_stock":true},{"title":"Festo QS Push Fitting for 4mm Tube \/ Festo QS Push Fitting for 4mm Tube","offer_id":43780163240179,"sku":"Fuel-Sensor (M)","price":138.49,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 6mm Tube \/ Festo Barb for 4mm Tube","offer_id":43780163338483,"sku":"Fuel-Sensor (M)","price":135.24,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 6mm Tube \/ Festo Barb for 6mm Tube","offer_id":43780163404019,"sku":"Fuel-Sensor (M)","price":135.49,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 6mm Tube \/ Festo QS Push Fitting for 6mm Tube","offer_id":43780163436787,"sku":"Fuel-Sensor (M)","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 6mm Tube \/ Festo QS Push Fitting for 4mm Tube","offer_id":43780163371251,"sku":"Fuel-Sensor (M)","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"Festo QS Push Fitting for 6mm Tube \/ Festo Barb for 4mm Tube","offer_id":43780163469555,"sku":"Fuel-Sensor (M)","price":136.74,"currency_code":"GBP","in_stock":true},{"title":"Festo QS Push Fitting for 6mm Tube \/ Festo Barb for 6mm Tube","offer_id":43780163535091,"sku":"Fuel-Sensor (M)","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"Festo QS Push Fitting for 6mm Tube \/ Festo QS Push Fitting for 6mm Tube","offer_id":43780163567859,"sku":"Fuel-Sensor (M)","price":138.49,"currency_code":"GBP","in_stock":true},{"title":"Festo QS Push Fitting for 6mm Tube \/ Festo QS Push Fitting for 4mm Tube","offer_id":43780163502323,"sku":"Fuel-Sensor (M)","price":138.49,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 4mm Tube \/ Festo Barb for 4mm Tube","offer_id":43780163076339,"sku":"Fuel-Sensor (M)","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 4mm Tube \/ Festo Barb for 6mm Tube","offer_id":43780163141875,"sku":"Fuel-Sensor (M)","price":135.24,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 4mm Tube \/ Festo QS Push Fitting for 6mm Tube","offer_id":43780163174643,"sku":"Fuel-Sensor (M)","price":136.74,"currency_code":"GBP","in_stock":true},{"title":"Festo Barb for 4mm Tube \/ Festo QS Push Fitting for 4mm Tube","offer_id":43780163109107,"sku":"Fuel-Sensor (M)","price":136.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4858\/8275\/products\/live_telentry_fuel_gauge_for_combustion_turbine_engines_from_smoke_systems_medium_15-200ml_min-2.png?v=1749112578"},{"product_id":"live-telemetry-fuel-gauge-for-combustion-turbine-engines-from-smoke-systems-fuel-sensor-l-250-3000ml-min","title":"Live Telemetry Fuel Gauge for Combustion \u0026 Turbine Engines from Smoke Systems Fuel Sensor (L) 250 - 3000ml\/min","description":"\u003ch3\u003eLive Telemetry Fuel Gauge for Combustion \u0026amp; Turbine Engines from Smoke Systems Fuel Sensor (L) 250 - 3000ml\/min\u003c\/h3\u003e\n\u003cp\u003eFuel gauge for combustion and turbine\u003cbr\u003eIs there enough fuel in the tank?\u003cbr\u003eCan I do another tow?\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Fuel-Sensor provides a reliable answer to such questions.\u003cbr\u003eThis telemetry sensor (for PowerBox P²BUS and Jeti EX-BUS) measures the fuel flow from the tank to the engine or to the turbine and can therefore reliably display the tank level.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFuel sensor (L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"imCellStyle_17\"\u003e\n\u003cdiv id=\"imTextObject_50_17\"\u003e\n\u003cdiv id=\"imTextObject_50_17_tab0\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eWith its measuring range of 250 - 3000ml\/min, this sensor is well suited for very large combustion engines and turbines \u0026gt;260N. The fuel sensor is simply inserted into the fuel line and measures the flow in the fuel line. Due to the axial structure, the measurement takes place with almost no resistance.\u003c\/div\u003e\n\u003cdiv\u003eThe only possible fuels are diesel and kerosene. The cylindrical sensor is simply inserted into the fuel line with the 4mm hose connectors. The attachment in the model can be done with two cable ties (included).\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis telemetry sensor (for PowerBox P²BUS and Jeti EX-BUS) measures the fuel flow from the tank to the engine or to the turbine and can therefore reliably display the tank level.\u003c\/p\u003e\n\u003cp\u003eDue to the measuring range, the sensor is suitable for combustion engines from approx. 100cc and turbines up to approx. 200N thrust.\u003cbr\u003eTelemetry for CORE\/ATOM and Jeti\u003c\/p\u003e\n\u003cp\u003eThe fuel sensor can be connected to the Jeti EX-BUS and the PowerBox P²BUS. The protocol used is automatically recognized by the sensor. The settings in the sensor are also made via the BUS. A separate programming device is not required. With the Jeti, the setting is made via the JetiBOX in the transmitter and with the PowerBox via the sensor menu.\u003c\/p\u003e\n\u003cp\u003eOnly a few settings need to be made:\u003cbr\u003eReset channel:\u003cbr\u003eThe fuel gauge is reset manually after refueling via a freely selectable channel.\u003cbr\u003etank volume:\u003cbr\u003eThe tank size is set here and saved in the sensor.\u003cbr\u003eReserve:\u003cbr\u003eThis is the amount of fuel left in the tank when the alarm goes off.\u003c\/p\u003e\n\u003cp\u003eThe sensor is immediately ready for use. As soon as the fuel sensor is connected to the bus, it automatically adapts to the correct bus protocol.\u003cbr\u003eThe sensor supplies the following values:\u003cbr\u003eTank capacity in ml\u003cbr\u003etank content in %\u003cbr\u003eReserve volume in ml\u003cbr\u003eflow in ml\/min\u003cbr\u003e(The values shown are shown accordingly for Jeti.)\u003c\/p\u003e","brand":"Smoke Systems","offers":[{"title":"Default Title","offer_id":43780163600627,"sku":"Fuel-Sensor (L)","price":159.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4858\/8275\/products\/live_telemetry_fuel_gauge_for_combustion_turbine_engines_from_smoke_systems_fuel_sensor_l_250_-_3000ml_min.png?v=1684676971"},{"product_id":"live-telemetry-fuel-gauge-for-combustion-turbine-engines-from-smoke-systems-fuel-sensor-s-20-1500ml-min","title":"Live Telemetry Fuel Gauge for Combustion \u0026 Turbine Engines from Smoke Systems Fuel Sensor (S) 20 - 150ml\/min) for upto 100N Turbines","description":"\u003ch3\u003eLive Telemetry Fuel Gauge for Combustion \u0026amp; Turbine Engines from Smoke Systems Fuel Sensor (S) 2 - 150ml\/min for upto 100N Turbines\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eFuel gauge for combustion and turbine\u003cbr\u003eIs there enough fuel in the tank?\u003cbr\u003eCan I do another tow?\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Fuel-Sensor provides a reliable answer to such questions.\u003cbr\u003eThis telemetry sensor (for PowerBox P²BUS and Jeti EX-BUS) measures the fuel flow from the tank to the engine or to the turbine and can therefore reliably display the tank level.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFuel sensor (S)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"imCellStyle_17\"\u003e\n\u003cdiv id=\"imTextObject_50_17\"\u003e\n\u003cdiv id=\"imTextObject_50_17_tab0\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eWith its measuring range of 20 - 150ml\/min (in pressure lines up to 300ml\/min) this sensor is suitable for combustion engines from approx 50cc-100cc and turbines up to approx. 100N. The fuel sensor is simply inserted into the fuel line and measures the flow in the fuel line. Gasoline and diesel\/kerosene as well as methanol are possible fuels.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis telemetry sensor (for PowerBox P²BUS and Jeti EX-BUS) measures the fuel flow from the tank to the engine or to the turbine and can therefore reliably display the tank level.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe fuel sensor can be connected to the Jeti EX-BUS and the PowerBox P²BUS. The protocol used is automatically recognized by the sensor. The settings in the sensor are also made via the BUS. A separate programming device is not required. With the Jeti, the setting is made via the JetiBOX in the transmitter and with the PowerBox via the sensor menu.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOnly a few settings need to be made:\u003cbr\u003eReset channel:\u003cbr\u003eThe fuel gauge is reset manually after refueling via a freely selectable channel.\u003cbr\u003etank volume:\u003cbr\u003eThe tank size is set here and saved in the sensor.\u003cbr\u003eReserve:\u003cbr\u003eThis is the amount of fuel left in the tank when the alarm goes off.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe sensor is immediately ready for use. As soon as the fuel sensor is connected to the bus, it automatically adapts to the correct bus protocol.\u003cbr\u003eThe sensor supplies the following values:\u003cbr\u003eTank capacity in ml\u003cbr\u003etank content in %\u003cbr\u003eReserve volume in ml\u003cbr\u003eflow in ml\/min\u003cbr\u003e(The values shown are shown accordingly for Jeti.)\u003c\/p\u003e","brand":"Smoke Systems","offers":[{"title":"Default Title","offer_id":54908286697858,"sku":"Fuel-Sensor (S)","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4858\/8275\/files\/LiveTelemetryFuelGaugeforCombustion_TurbineEnginesfromSmokeSystemsFuelSensor_S_20-1500ml_min.jpg?v=1736787259"}],"url":"https:\/\/nexusmodels.co.uk\/collections\/telemetry-el.oembed","provider":"Nexus Models","version":"1.0","type":"link"}